 |
 |
| |
Voltage fluctuation is a common phenomenon in the country. The industrial units which are running 24hours, face high and low voltage related problems.85% of industrial load is of motors. Electric motors draw considerably high current at high and low voltage. This higher current affects the electrical motors in different ways.
- Higher current produces higher losses in electrical motors, which causes premature failure of winding insulation.
- It increases the losses of electric motors and other associated equipments.
- This higher current of electric motor requires higher setting of overload relay to avoid frequent tripping of motors. Higher setting of overload relay have very little safety margin against single phasing & mechanical faults.
With the installation of stabilizer, the higher current drawn by motor on account of voltage variation is eliminated. The overload relay can be set as per requirement of motor load, which will reduce the motor failure rate considerably. |
|
| |
|
 |
|
| |
|
Sushil Electricals, Automatic Voltage Stabilizer is available in a wide range and various models. The standard three phase models are suitable for balanced input supply and fairly balanced loads.
- Input Voltage
- Efficiency (Approx.)
- Output Voltage
- Cooling
- Type
- Temp. Rise (Max.)
- Rate of Voltage Correction
- Wave from distortion
- Duty Cycle
- Mounting
Sushil Electricals, Automatic Voltage Stabilizer is available in a wide range and various models. The standard three phase models are suitable for balanced input supply and fairly balanced loads.
Sushil Electricals, Automatic Voltage Stabilizer is available in a wide range and various models. The standard three phase models are suitable for balanced input supply and fairly balanced loads.
Sushil Electricals, Automatic Voltage Stabilizer is available in a wide range and various models. The standard three phase models are suitable for balanced input supply and fairly balanced loads.
|
 |
| |
| Sushil Electricals Make Rolling Contact Type Regulator |
Conventional make with Carbon Brush Regulator |
| Power Consumtion is 0.5 to 1.5 depending upon the model and input voltage variation. |
Power Consumtion is 3 to 5 depending upon the model and input voltage variation. |
| Suitable for continuous 99% Duty Cycle |
Suitable for continuous 40% - 50% Duty Cycle |
| The Carbon roller roll, while moving on the coil track, so contact point of the roller goes on changing which prolongs the life of the roller |
Since the contact is by brush having flat surface, wear and tear of the brush is more & require frequent replacement |
| Life at full load is 17 to 20. |
Life at full load is 3 to 5 Years. |
| Negligible losses in full boost and buck condition |
Maximum losses in full boost and buck condition |
| Five years unconditional guarantee. |
Normal guarantee for one / two years. |
|
| |
 |
| |
1. Energy Saving upto 10% possible.
2. Reduction in Power Consumption
3. Depreciation 80% from Income Tax
4. Uniform Quality of end Product and Lesser Rejection
5. Reduced failure rate of electrical equipments upto 80%
6. Improvement in PF and reduction in MDI. |
|
 |
| |
Sushil Electricals stabilizer is suitable for 99% continuous duty cycle.
The stabilizer can be installed as per actual running load or with a
provision for future expansion. Flour Mills, Cement Plants, Cold Storage, Rolling Mills, Tube Mills, Oil & Vanaspati Units, Hospitals & Nursing Homes, Hotels, Clubs, Paper Mills, Footwear & Leather Units, Food Processing Plants, Pharmaceutical Units, Distilleries & Beverages, High Rise Building & Showrooms. |
|
|
|
|
